Concrete Cutting – Town Hall Station

Our Perfect Concrete Care team members have just completed Concrete Cutting works for our client, DEGNAN Constructions, at Town Hall Station. These works involved cutting a section of a concrete slab above the escalators.

Techniques Used

Our team members performed a concrete cutting project for our client, DEGNAN Constructions, at Town Hall Station. The scope of work was to cut a section of concrete slab above the escalators.

To perform the cutting, our team members used our Hilti Electric 14” Demolition Saw, as the project was indoors, so due to fumes, the petrol Husqvarna Demolition Saw could not be used. Our client also requested slurry control, to ensure the surrounding area was not damaged during the cutting process as a water supply is needed to keep the diamond blade from overheating.

For this, our team members used our Hilti VC50 Dry / Wet Vac that connects directly into the blade guard of the demo saw, allowing the slurry to be vacuumed out straight off the blade. This allows us to control the slurry effectively and reduces the time spent by our team members cleaning the site afterwards.

Once the cut was completed, our team members used our Metabo 5” Diamond Grinder to grind down the edge to ensure a smooth surface was left for our client. All works were carried out after hours, at Perfect Concrete Care we can perform complex works after hours if you require.

The Result

The client was delighted with the outcome of the works and the speed in which it was carried out.

  • Client
    DEGNAN Constructions
  • Location
    Town Hall Station, Sydney
  • Duration
    November 2017

Concrete Cutting Specialists

Call us today to speak to one of experienced team members about your project!

READ MORE