Concrete Cutters Ballina

This really depends on a number of scenarios, we have a number of different type of concrete saws that all cut to different depths. Everything from the Hilti 14” Electric saw which can cut 120mm right up to our large wall saw which can reach depths of 520mm.

Yes of course we use the best quality saws on the market that are capable of cutting through asphalt, sandstone, brick or any other material you need to get through.

Yes we have two large road saws, our large Tyrolit CC6560XLS road saw is capable up cutting down to depths of 450mm while our Cut Core CC1800XL can cut down to 230mm.

No you do not need to provide a water supply. If you do not have one available we user our Makinex Hose2Go constant pressure water supply pumps to supply the water to our saws.

A water supply is needed to carry out concrete cutting to ensure the diamonds on the blades are kept cool and to stop them from overheating.Yes we have two large road saws, our large Tyrolit CC6560XLS road saw is capable up cutting down to depths of 450mm while our Cut Core CC1800XL can cut down to 230mm.

Unfortunately there is no way of fully stopping the slurry created but we can provide slurry control to you. We use our very powerful Wet Vac’s to suck up all the slurry created and keep it controlled.

We do not allow our operators to carry out horizontal cuts with our hand held saws as it is very dangerous and we strongly advise against it. We recommend using our remote controlled wall say, which can be mounted on the wall and carry out accurate horizontal cuts of depths up to 520mm deep. This is a much safer method as our operator can control the saw remotely from a safe distance.

Unfortunately due to most of our demolition saws being fuel based using petrol engines there is not much we can do about the noise. Also due to the amount of pressure and power needed for saws to cut through concrete there is quite a lot of noise created while cutting. We do however have a couple of options available we can use our hydraulic demo saws is there is a emissions restriction in a confined space. We always do our best to work around noise restrictions or noise exclusion periods with our clients.

We do carry out projects for our clients outside of the Northern Rivers Region however there are extra travel costs applied, as there is a significant travel time for our operators.

Yes of course we can provide a full set of S.W.M.S upon request. S.W.M.S are generally required for larger construction sites and we will provide site-specific documents as needed. We are happy to work with safety officers for any special requirements they might have.