Post Tensioned Slab Cutting and Cable Truncation on the Gold Coast
Post tensioned cutting on the Gold Coast: Post tensioned slabs opened, truncated and reinstated
- GPR scan first, from the top and from underneath where needed
- Pockets held open for engineer sign off, then reinstated
- Every pocket photographed and numbered for the ITP
- Carbon fibre strengthening where the engineer specifies it
Penetrations through post tensioned slabs on the Gold Coast, opened, truncated and reinstated to your structural engineer's design. Scanning, cutting, repair and strengthening under one contract, so nothing is lost between two subcontractors.
Why you cannot just cut a post tensioned slab
The tendons in a post tensioned slab were stressed after the pour and still carry that load. Open a penetration through one and you are working beside live steel that has held force since jacking. Cut the wrong strand without a plan and that force finds its own way out. Hitting a tendon is a structural event, not a repair. Every truncated tendon also takes capacity out of the slab, which the engineer must put back. So the scan and engineer sign off come before any saw starts.
How the work runs
- Scan and mark with the Hilti PS1000 X-Scan GPR, from the top and from underneath a beam where the geometry needs it. Tendons, reinforcement, conduits and depth are marked on the slab.
- Scanning report the structural engineer designs the truncation, pocket sizes, setout and strengthening from. We do not design or sign off.
- Open and clean each pocket to the approved size and setout with wall saws, core rigs or stitch coring. Water is managed so nothing runs to the floor below.
- Leave every pocket open until the engineer has inspected and signed it off.
- Epoxy fill and reinstate flush to the approved detail, then photograph and number every pocket for the ITP.
- Put the capacity back. Where the engineer specifies bonded carbon fibre, plate or wet lay up fabric, we install it under the same package with adhesion tests, batch numbers, temperature and humidity readings and photos handed over. Sika CarboDur S812 with Sikadur 30 has been installed on our jobs.
Typical jobs on the Gold Coast
Lift and stair penetrations. Riser openings for hydraulic, fire, mechanical and electrical services. Escalator voids in towers and shopping centres. Slab removal for new plant. Fit out penetrations where a tendon sits in the way. Demolition of post tensioned structures, cut in engineered pieces and lowered by block and tackle or crane. Plant as on our specialist sawing and deep coring work: Tyrolit WSE1217 wall saw, Tyrolit WCE14 wire saw, Hilti DD350 and DD250 core rigs.
Safety and paperwork the head contractor wants
SWMS, inductions and quality records go into your systems and the pocket by pocket photographic record is built as we go. Where carbon fibre is installed the records pack covers substrate survey, moisture readings and adhesive batch numbers. We work on live sites on the Gold Coast: operating hospitals, occupied buildings, night works, staged handovers and trading centres. Perfect Concrete Care is part of Perfect Group, with the insurance, licences and management systems a head contractor expects.
Where we work on the Gold Coast
Post tensioned slab work on the Gold Coast runs across the Southport, Surfers Paradise and Broadbeach high rise towers, Robina and Varsity Lakes commercial buildings, the Gold Coast University Hospital precinct, Helensvale, Burleigh and Coolangatta, and the shopping centre car parks and mixed use podiums along the coast.
The Gold Coast is under an hour from our Slacks Creek base, so night works in an occupied tower or a trading centre car park are easy to staff and the crew can come back for the engineer inspection at short notice.
Queensland work on the books includes wire sawing a 1m x 600mm x 12m capping beam into 4m blocks at Roma Street Station for Cross River Rail and overcut free wall penetrations at level B3.5 of Roma Street Station, with Stage 2 slab penetrations to follow. The crew travels across South East Queensland for planned programmes of this work; the full method is on the tendon truncation hub.
Frequently asked
Do you cut post tensioned slabs for domestic clients on the Gold Coast?
No. We work for head contractors, builders, structural engineers, facilities and strata managers and fit out contractors on commercial structures only.
Who designs the truncation?
Your structural engineer. We scan and hand over a report the engineer designs from, then the engineer inspects the open pockets and certifies the work. We do not design or sign off.
How deep can the scanner see the tendons?
The Hilti PS1000 X-Scan locates post tension and pre tension cables and their depth. Our scanning page quotes 320mm, and on one project we located cables up to 400mm deep. Where a beam is in the way we scan from underneath as well.
What happens if the scan finds more tendons than the drawings show?
It often does. On the hub example the drawings showed 19 tendons, the first scan marked 21 and a second scan from under a beam took it to 26, leaving 23 pockets after three at dead end anchorages were excluded. The engineer designs from the scan, not the drawings.
Other areas and related services
We also cut post tensioned slabs in Sydney, Wollongong, Newcastle, Brisbane and Sunshine Coast. Full method: tendon truncation. Related on the Gold Coast: concrete scanning, carbon fibre strengthening, core drilling and concrete cutting.
What happens next
Call 07 2145 6581 or send the form below with the address, the drawings, the size and number of openings and the slab thickness. Our Queensland team run the job from our Slacks Creek base and will come back with a method, a programme and a price. If the engineer has not seen a scan yet, the scan is the first booking.
Need a price on this work?
Send us the scope and we will come back to you with a price. Commercial and industrial work only.
Perfect Concrete Care acknowledges the Aboriginal and Torres Strait Islander people as Traditional Custodians of the country on which we live and work. We pay our respects to the Traditional Custodians and Elders past, present and future, and honour their connection to the land and ongoing contribution to society.